Descargar Imprimir esta página

Oster BVSTEM7400 Manual De Instrucciones página 72

Publicidad

Idiomas disponibles

Idiomas disponibles

DESCALING CYCLE – ESPRESSO MACHINE
Important: The Descaling Cycle can
be exited at any point by pressing the
MANUAL BREW BUTTON.
Step 1. Descaling Cycle of Portafilter
and steam wand
- Turn the DIAL to the STEAM position.
- The STEAM LIGHT will
now be fully illuminated.
- The Pump will start and hot water will run from the
Group Head & Steam Wand. Over a pre-defined
period the Pump will make different noises.
- When hot water has stopped being released
from the Group Head & Steam Wand, this step is
finished.
- To indicate the machine has finished this step the
machine will beep, the STEAM LIGHT will now
start to flash.
- Turn the DIAL to the vertical position, and the
Steam light will extinguish.
- The Descale icon will
continue to pulse.
Move to Step 2.
Step 2. Descaling Cycle of Hot water tap
Turn the DIAL to the HOT WATER position.
- The HOT WATER LIGHT will now be fully
illuminated.
- The Pump will start and hot water will run from
the Hot Water tap. Over a pre-defined period the
Pump will make different noises.
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 35
BVSTEM7400_23SEM1 (LA)_SPA/ENG.indd 35
- When hot water has stopped being released from
the Hot water tap, this step is finished.
- To indicate the machine has finished this step the
machine will beep, the HOT WATER LIGHT will
now start to flash.
- Turn the DIAL to the vertical position, and the hot
water light will extinguish
- The Descale icon
will continue to pulse.
Move to Step 3.
Step 3. Preparing for Purge
Important: There is a maximum of 5 minutes
allowed to complete this step before the
Descaling Cycle will exit.
- The Steam Wand & Group Head now need to be
purged clean with fresh water to remove descaling
solution.
• Rinse Water Reservoir
Remove the Water Reservoir and rinse thoroughly
under running water, ensuring that all traces of the
descaling solution.
• Fill Water Reservoir
- Fill the Water Reservoir to the 'Max' line with cold
water and insert into position.
• Empty Containers
- Empty water from the containers and replace.
Move to Step 4.
Step 4. Start Purge
- Turn the DIAL to the STEAM position.
English - 35
2023/11/7 10:38
2023/11/7 10:38

Publicidad

loading