Roger Technology B70/1T Instrucciones Y Advertencias Para El Instalador página 54

3
Technical characteristics of product
MAINS POWER VOLTAGE
MAXIMUM MAINS POWER ABSORPTION
(FROM NETWORK)
INRUSH POWER (FROM NETWORK)
FUSES
CONNECTABLE MOTORS
MOTOR POWER SUPPLY
MOTOR TYPE
MOTOR CONTROL TYPE
RATED MOTOR POWER
STARTING MOTOR POWER
MAXIMUM POWER, FLASHING LIGHT
FLASHING LIGHT DUTY CYCLE
MAXIMUM POWER
GATE OPEN LIGHT POWER
MAXIMUM ACCESSORY CURRENT
ABSORPTION
OPERATING TEMPERATURE
SOUND PRESSURE DURING USE
PRODUCT DIMENSIONS
TW90/800/115 - TW90/820/115 - TW90/600/HS/115 - TW90/620/HS/115
(1)
The total of the absorption values of all the accessories connected must not exceed the maximum power values
shown in the table. The values are guaranteed with original ROGER TECHNOLOGY accessories ONLY. The use of
non-original accessories may lead to malfunctioning. ROGER TECHNOLOGY declines all responsibility for incorrect or
non-conforming installations.
All the connections are protected by fuses (refer to the table). The courtesy light requires an external fuse.
4
Description of connections
• remove the four screws and lift the cover
If the B71/BC
• pull out the drawer containing the charger and batteries.
Figure 3-4-5-6-7 shows connection diagrams for connecting mains voltage to the motor control unit (B70/1T).
54
TW90/800
TW90/820
230 V~ ± 10% 50 Hz (115 V~ ± 10% 60 Hz)
180 W
315 W 295 W
F1 = 15A (ATO257) motor power circuit protection
F2 = 2A (ATO257) accessories power supply protection
F3 = T1A (5x20 mm) (B70/1T/115: T2A (5x20 mm)) primary transformer
protection
1
24 V~, variable frequency, with self-protected inverter
sinusoidal drive Brushless (ROGER BRUSHLESS)
120 W 100 W
290 W 270 W
25 W (24 V )
50%
3 W (24 V )
10 W (24 V )
-20°C +55°C
<70 dB(A)
dimensions in mm 165x117
TW90/600/HS
TW90/620/HS
(1)
345 W
85 W
320 W
(potential free contact)
weight: 0,233 kg
TW90/800/R
TW90/820/R