Roger Technology B70/1T Instrucciones Y Advertencias Para El Instalador página 75

Password
Setting a password prevents unauthorised persons from accessing the settings.
With password protection active (
Only a single password is used to control access to the gate automation system.
WARNING: Contact the Technical Support Service if you lose your password.
Password activation procedure:
• Enter the desired values for parameters
• Use the UP
• Press and hold the + and - buttons for 4 seconds.
•
• Switch the control unit off and on again. Check that password protection is activated ( =
Temporary unlock procedure:
• Enter the password.
• Check that = .
Password cancellation procedure:
• Enter the password ( =
• Save the values , ,
• Use the UP
• Press and hold the + and - buttons for 4 seconds.
•
indicate that no password is set).
• Switch the control unit off and on again.
Changing password
Protection deactivated.
Protection activated.
=
, , and
buttons to view the parameter
).
, =
buttons to view the parameter
.
.
.
).
, , and
75