Publicidad
Idiomas disponibles
Idiomas disponibles
e
P
ndo
ocket
Advanced Technology Research s.r.l.
Operating instructions
8. Maintenance
GB
Servicing
Check the micromotor cable at least once every 6 months. In the event the sheathing is
worn, have it replaced by an authorised service centre.
Do not lubricate the micromotor for any reason. After having lubricated the contra-
angle, ensure the lubricant does not penetrate inside the micromotor.
Lubricant inside the micromotor strongly jeopardises unit operation and safety. In
this condition, replacement of the micromotor cannot be considered an intervention
covered by the warranty.
Supplementary maintenance
In the event supplementary maintenance is required, please contact
Advanced Technology Research S.r.l., Via S. Donato 1, 51100 - PISTOIA, ITALY
(www.atrdental.com) as manufacturer.
The manufacture is committed to providing the machine's electro-mechanical diagrams
to personnel it deems qualifi ed to perform repairs.
22
Publicidad
