Descargar Imprimir esta página

Silvercrest SDG 950 D4 Instrucciones De Uso página 16

Cocedor eléctrico al vapor

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 120
Eggs
Eggs
Quantity
Soft
Medium
max. 6
hard
pcs. per
steam at-
tachment
Hard
Cleaning
DANGER! ELECTRIC SHOCK!
Before cleaning the appliance, disconnect the
power plug from the mains power socket!
Never immerse the base 9 in water or
any other liquids!
WARNING! RISK OF INJURY!
Allow the appliance and accessories to cool
down completely before cleaning them.
CAUTION!
Do not use aggressive or abrasive cleaners,
as these may damage the surface of the
appliance.
Clean the appliance and accessories after
each use.
Remove the steam attachments 5/4/3.
Slide the base plate z of the steam attach-
ment 5/4/3 to one side and carefully push
it up from there.
Remove the liquid collection tray 6. Pull the
steam tube 7 upwards out of the steamer e.
1) Clean the base 9 with a slightly damp cloth.
If necessary, add a little washing-up liquid to
the cloth. Afterwards, wipe off with a cloth
moistened only with water to ensure that no
detergent remains on the appliance.
2) Clean the accessories in warm rinse water.
SDG 950 D4
Water
Cooking
quantity
time
8–12 min.
11–15 min.
500 ml
15–20 min.
Place the eggs in the wells of the base
plate z of the steam attachment
5/4/3.
the cooking time in the lowest steam at-
tachment 5 is approx. 5 min. shorter than
in the ones above.
The cooking time may vary depending on
the number, size and desired hardness of
the eggs.
Note:
All removable parts can also be
cleaned in the dishwasher.
3) Allow all parts to dry completely before
reassembling.
4) To reassemble the steam attachments 5/4/
3 press the base plates z back into the steam
attachments 5/4/3. Make sure that the
wells for the eggs are facing downwards. The
3 slots on the steam attachments 5/4/3
must engage in the corresponding lugs on the
base plates z.
Descaling the appliance
Depending on the water hardness, limescale
deposits may form in the appliance over time.
Descale the appliance regularly to maintain
steam production and increase the life of the
steamer.
1) Remove light calcification with a cloth soaked
in a little vinegar. Rinse thoroughly afterwards.
2) If the steamer e is heavily calcified, fill the
base 9 with water and a commercial descaler
and leave everything overnight.
CAUTION!
Never switch on the appliance to descale it!
This can cause irreparable damage.
Notes
GB │ IE
 13

Publicidad

loading