SICE S 65 Manual De Instrucciones página 105

Press the Enter button
-
- Press the Exit button
After selecting, the new setting is saved and the unbalance image is displayed again.
Enables/disables the Optimisation programme warning at the end of the spin. After the list
of the setting programmes is displayed, proceed as follows:
- Select the Enable/Disable OPT warning icon
The following icons are displayed:
OPT OFF; deactivates the OPT warning;
OPT ON; activates the OPT warning.
- Press the Enter button
- Press the Exit button
The selection can also be seen in the working screen status line.
Allows two preferred icons to be set on the main icon bar.
After the list of the configuration programmes is displayed, proceed as follows:
- Select the preferred programmes icon
- All the utility and balancing programmes icons are displayed.
- Select the two programmes to be displayed in the main window by using the Enter
button .
User manual S 65
to select the icon desired.
to save the setting and exit.
OPT warning configuration
to select the icon desired.
to save the setting and exit.
Preferred programme configuration
.
.
UK
105