SICE S 65 Manual De Instrucciones página 90

9. Move the wheel to a centred position (P1 or P2).
10. The brake is activated automatically at the centred position. Apply the balancing weight
indicated on the monitor as described in the chapter "ALU 1P, ALU 2P Programmes".
11. Move the wheel to a centred position (P1 or P2).
12. Repeat the operations in step 10.
13. Once the Hidden Weights programme procedure is complete, you may continue
working with any other balancing programme.
Standard ALU programmes take into account the different possibilities of weight ap-
plication (Fig. 17)
and provide correct unbalance values while maintaining the rated geometric data set-
ting of the alloy wheel.
ALU 1 balancing programme:
calculates statistically the balancing weights to be applied on the inner part of the rim,
as illustrated by the relevant icon.
ALU 2 balancing programme:
calculates statistically the balancing weights to be applied on the inner side and the
inner part of the rim, as illustrated by the icon.
90
Standard ALU Programmes
(ALU 1, 2, 3, 4, 5)
17
User manual S 65