Publicidad
Idiomas disponibles
Idiomas disponibles
art_01 cassette awning installation instructions
Bracket set (B-set)
1.20 Bracket arrangement and pull-out forces for CEILING installation
!
Make sure to follow important installation information!
All supplied brackets must be used and the brackets must also be installed using all fi xation points.
The pull-out forces must be observed (see page 9).
Ceiling bracket CB 8/9
Standard ceiling bracket
With left and right version
2 fi x. points per bracket
2 x Ø 12
Ceiling installation
4 x Ø 17
4 x Ø 38
Please note: With this type of awning, the brackets can only be installed on the very outside in the area of the functional bearings.
The centre-to-centre distance cannot be changed.
Fix. points = fi xation points; B-set = bracket set; WB = wall bracket; CB = ceiling bracket; RB = recess bracket
8
2 x Ø 12
Ceiling panel CB 12
For left and right
4 fi x. points per bracket
4 x Ø 17
4 x Ø 38
2 x Ø 12
4 x Ø 17
4 x Ø 38
KW bracket set, standard ceiling
bracket set
Consisting of 1 piece CB 8 (left)
and 1 piece CB 9 (right). The
brackets are also the awning's side
bearings.
A total of 4 fi x. points
KP bracket set, standard ceiling
bracket set
Consisting of 2 pieces CB 12 for
installation on difficult substruc-
tures.
A total of 8 fi x. points
Rafter bracket
A total of 4 fi x. points
Rafter bracket
For left and right
4 fi x. points per bracket
4 x Ø 12
LL 14 x 47
Subject to technical changes, edition 09/2023
Publicidad
