Publicidad
Idiomas disponibles
Idiomas disponibles
art_01 cassette awning installation instructions
Installation
1. Wall and ceiling installation
1.2 Marking unit width:
Mark unit width (cassette width + 146 mm) on the wall or ceiling (hori-
zontal or parallel to edges) (see Fig. 03).
1.3 Marking awning back edge:
Mark desired awning lower or upper edge (for wall installation) or
awning back edge (for ceiling installation) (horizontal or parallel to
edges) (see Fig. 04).
1.4 Transferring hole pattern:
To transfer the hole pattern, position the brackets according to the
markings and mark the holes with a pencil (see Fig. 05).
Hole pattern and markings
14
112 mm
for ceiling
installation
Mark unit width
Fig. 03: Marking unit width (ceiling installation here, for example)
Mark awning back edge
Fig. 04: Marking awning back edge (ceiling installation here, for example)
Fig. 05: Transferring hole pattern (ceiling installation here, for example)
Subject to technical changes, edition 09/2023
Publicidad
