Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OPERATION
Remote Control (Cont'd)
1. Stop Button
Press to stop all operating functions.
2. Rear Wash / Move Button
Press once to initiate a 4-minute rear
wash. Press again to initiate nozzle
oscillation (repetitive forward and
backward nozzle movement).
3. Front Wash / Move Button
Press once to initiate a 4-minute front
wash. Press again to initiate nozzle
oscillation (repetitive forward and
backward nozzle movement).
4. Nozzle Cleaning Button
Press to initiate a 2-minute automatic
nozzle cleaning when not sitting, or when
the seat sensor is deactivated. For more
nozzle maintenance instructions, see
page 26
5. Advanced Air Dryer Button
Press once to initiate a 4-minute warm air
dry cycle. Press again to adjust between
3 fan speed settings (low, med, high).
NOTE: the unit will auto-flush when you
initiate the warm air dryer. To deactivate
the auto-flush before dry, go to page 20
6. Water Pressure Button
Press for 5 adjustable water pressures
during wash. Settings will be saved for
the next use.
7. Nozzle Position Button
Press to adjust the nozzle position
forward and backward during a wash
cycle. Settings will be saved for the
next use.
8. Water Temperature Button
Press to adjust the outgoing water
temperature to one of 6 settings—
(OFF, Level 1 = 87.8°F / 31°C; Level 2 =
91.4°F / 33°C; Level 3 = 95.0°F / 35°C;
Level 4 = 98.6°F / 37°C; Level 5 = 102.2°F
/ 39°C). Settings will be saved for the
next use.
9. Seat Temperature
Press to adjust the seat temperature to
one of 6 settings—(OFF, Level 1 = 86.0°F
/ 30°C, Level 2 = 89.6°F / 32°C, Level 3
= 93.2°F / 34°C, Level 4 = 96.8°F / 36°C,
Level 5 = 102.2°F / 39°C). Settings will be
saved for the next use.
17
10. LED Indicator Lights
Indicates water pressure and
temperature, nozzle position,
and advanced air dryer and seat
temperature.
11. Dryer Temperature Button
Press to adjust the warm air dryer
temperature between 4 levels.
Settings will be saved for the next
use. NOTE: The dryer temperature will
vary depending on the surrounding
air temperature of the room.
12. Nightlight Button
Press to turn the toilet bowl
nightlight on or off. NOTE: This unit
has an auto-sensing nightlight that
will automatically turn on or off
depending on the amount of light in
the room.
13. Open/Close Lid Button
Press to open the lid. Press again
to close. If both the lid and seat are
up, pressing this button will close
both the seat and lid and the toilet
will flush. NOTE: The unit comes
defaulted with an auto-opening lid
when you approach the seat. To
deactivate this feature, go to page 22.
14. Open/Close Seat Button
Press to open the lid and seat. Press
again to close the seat only. The lid
and/or seat will close automatically
after 45 seconds when it no longer
detects a user within a
3 feet radius.
15. Flush Button
Press to flush the toilet. NOTE:
The toilet will automatically flush 6
seconds after you leave the seat.
Publicidad
