Descargar Imprimir esta página

brondell Sutro IBT-1000 Manual Del Propietário página 6

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY INFORMATION
(IMPORTANT SAFEGUARDS)
Grounding and GFCI Outlet Instructions
This product should only be used with a grounded GFCI
(Ground Fault Circuit Interrupter) outlet and a grounded
three-prong electrical cord as shown to the right. In the
event of an electrical short circuit, using a grounded GFCI
outlet reduces the risk of electric shock.
This product is equipped with a grounded cord and is for
use on a nominal 120V circuit only (minimum 15 amps) and
must be plugged into an outlet that is properly grounded
with a GFCI breaker as shown. Replace or repair a damaged
cord immediately.
IMPROPER USE OF THE GROUNDING PLUG CAN
RESULT IN A RISK OF ELECTRIC SHOCK.
If repair or replacement of the cord or plug is necessary,
do not connect the grounding wire to either flat blade
terminal.
The wire with green insulation (either with or without a
yellow stripe) is the grounding wire. Check with a qualified
electrician if the grounding instructions are not completely
understood, or if there is doubt if the product is properly
grounded.
5
Ground GFCI Outlet
Grounding Pin
Test
Reset

Publicidad

loading