Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OPERATION
Manual Flush, Eco Mode, and Nightlight
Manual Flush
In the event of a power outage or remote
malfunction, the flush control can be
activated using the flush button located on
the right side of the seat when seated on
the toilet.
21
Eco Mode
In Eco Mode, the seat temperature will
be heated to 86°F / 30°C when the bidet
is not in use. Once a person sits on the
seat, it will revert to the last temperature
setting used.
To turn on Eco Mode, press and hold the
water temperature button for 3 seconds.
The unit will beep indicating the setting
has been saved.
Nightlight
This unit has an auto-sensing nightlight
that will automatically turn on or off
depending on the sensitivity of light in
the room. Press the nightlight button
once to turn off auto-sensing nightlight.
The nightlight will no longer turn on. Press
the nightlight button again to reactivate
auto-sensing nightlight.
Press and hold the nightlight button
for 3 seconds to permanently turn the
nightlight on or off regardless of the
light sensitivity in the room. NOTE: the
auto-sensing nightlight will not work if the
nightlight is permanently turned on or off.
Publicidad
