Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Cleaning the Seat and Nozzle
Unplug the integrated bidet from the power source before cleaning the seat.
Use a soft, damp cloth and mild cleanser (such as dish soap, Simple Green or Windex) to
wipe down the seat. DO NOT scrub or use harsh, abrasive products to clean. DO NOT use
thinner, benzene, acidic chemicals, chloride, or hydrochloric acid detergent. This may
result in corrosion to the metal parts or discoloration or scratches to the bidet body.
NOTE: Be cautious of leaving home and beauty products in contact with the bidet seat, the result
of which can be irreversible discoloration. Most stains can be removed using a 1:1 mix of rubbing
alcohol and water and a soft cloth or towel. However, some permanent stains are the result of
substances left on the seat while the seat heater was activated. Be cautious of home and beauty
products (including but not limited to various hair and air freshener sprays, lotions, body wash,
skin tanners, body butters, and oils) that come in contact with the seat. Wash off any substances
that come in contact with the seat as soon as possible.
UV Nozzle Cleaning
This unit includes an ultra-violet (UV) light for intensive
nozzle cleaning, which automatically activates 10
seconds after leaving the seat. The UV light will stay
active for 3 minutes. If the seat is activated within the
3-minute timeframe, the UV light will shut off.
Nozzle Cleaning (Manual)
1. Press and hold the nozzle cleaning button for
3 seconds and the nozzle will extend.
NOTE: The nozzle cleaning function will not
work while the seat is occupied or if the seat
sensor is turned off.
2. Gently clean the nozzle manually with a soft
cloth or toothbrush. Do not forcefully hold or
press down on the nozzle otherwise damage
can occur.
3. The nozzle tip can be removed for deep
cleaning.
4. The nozzle will automatically retract after 4
minutes.
UV Light
Step 2
Nozzle
Step 4
26
Publicidad
