General Safety Notices; Contacts And Useful Addresses; Symbols - Tecno-gaz PURA 10 BIOX Manual Del Usuario

ENGLISH
GENERAL SAFETY NOTICES

Make sure the tool is supplied with the correct voltage indicated on the
plate.

Do not remove the plate

Be sure the system is fitted with earthing.

Clean the tool with a dry cloth.

Before any intervention unplug the tool from power supply.

Use original spare parts only
The non respect of the above instructions shall relieve the manufacturer from any type of
responsibility.
CONTACT AND USEFUL ADDRESSES
Requests of technical service shall be addressed to the storehouse invoicing the device
or directly to :
TECNO –GAZ S.p.A.
Strada Cavalli 4, 43038, Sala Baganza, Parma, ITALY.
phone +39 0521 83.80 ‐ Fax +39 0521 83.33.91
e‐mail : info@tecnogaz.com
www.tecnogaz.com
SYMBOLS
Tecno‐Gaz S.p.A. – Strada Cavalli, 4, 43038, Sala Baganza, Parma
In full compliance with Directive 2002/96/EEC this symbol indicates
that the product, at the end of its useful life, shall not be disposed of as
urban waste.

General notices and information to the user .
Pay attention to instructions accompanied by this symbol
Conformity to Directive 2004/108/EEC and Directive 2006/95/EEC as
amended .
PE
External protection.
Safety EARTHING.
6