Tabla de contenido
Publicidad
HANDLEBAR
5. Install:
Throttle cables 1
G
To tube guide 2.
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
6. Install:
Throttle cable cap 1
G
Screw (throttle cable cap) 2
G
WARNING
After tightening the screws, check that the
throttle grip 3 moves smoothly. If it does
not, retighten the bolts for adjustment.
7. Install:
Cover (grip cap) 1
G
Cover (throttle cable cap) 2
G
5 - 44
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)
Publicidad
Tabla de contenido
