Yamaha WR426F Manual De Servcio Del Propietario página 686

Ocultar thumbs Ver también para WR426F:
Tabla de contenido

Publicidad

REAR SHOCK ABSORBER
2. Install:
NOTE:
Apply the molybdenum disulfide grease on
G
the bearing.
Apply the lithium soap base grease on the
G
bush, collars and dust seals.
Install the dust seals with their lips facing
G
outward.
3. Install:
4. Install:
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
6. Install:
7. Tighten:
1
5 - 66
Bush 1
G
Collar 2
G
Dust seal 3
G
Rear shock absorber
G
Bolt (rear shock absorber-frame) 1
G
Nut (rear shock absorber-frame) 2
G
56 Nm (5.6 m · kg, 40 ft · lb)
Bolt (rear shock absorber-relay arm) 1
G
Nut (rear shock absorber-relay arm) 2
G
53 Nm (5.3 m · kg, 38 ft · lb)
Rear frame 1
G
Bolt (rear frame) 2
G
29 Nm (2.9 m · kg, 21 ft · lb)
Bolt (reservoir tank) 3
G
10 Nm (1.0 m · kg, 7.2 ft · lb)
Screw (air cleaner joint) 1
G
3 Nm (0.3 m · kg, 2.2 ft · lb)
CHAS

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wr426fpWr400fWr400fp

Tabla de contenido