Blade And Counter Blade Replacement - Virutex EB140 Manual De Instrucciones

A
Fig. 58
B
Fig. 59
E
E
Fig. 60
H
J
K
I
Fig. 61
D

7.4.2 BLADE AND COUNTER BLADE REPLACEMENT

C
• Open the feeder A (Fig. 57)
• Remove the screws and washers B (Fig. 58), using the ser-
vice key C (Fig. 58)
• Remove the blade block D (Fig. 59), being careful not to lose
the washers E (Fig. 59).
• Replace the blade F (Fig. 59), removing the screws G using
the service screwdriver H (Fig. 59).
D
• Remove the screws and washers I (Fig. 60), the flange J (Fig.
60) and the counter blade K (Fig. 60), using the service key H
H (Fig. 60) and replace the counter blade K (Fig. 60).
• Finally, mount the blade block D (Fig. 61). Make sure that
the blade block D (Fig. 61) slides smoothly by pushing it with
your hand. Make sure that it is capable of cutting a piece of
writing paper cleanly, without bending it.
(Figure 57)
F
G
H
EB140 / Operating instructions - 113