Residual Risks - Virutex EB140 Manual De Instrucciones

• Never open the doors or protective devices when the
machine is in operation.
• Certain objects, such as bracelets, watches, rings, etc.,
may cause serious accidents. They must be removed.
• Work clothing must be correctly fastened, with no loo-
se parts that might become caught in moving groups.
• Wear work safety shoes specified in the accident pre-
vention regulations.
• Wear safety goggles.
• Wear protective hearing and dust equipment (hea-
dphones, face masks, etc.).
• Equipment use, handling or the performance of any

3.2 RESIDUAL RISKS

Even when all these safety guidelines are followed, re-
sidual risks may still exist. The following are the most
common:
• Contact with tools
• Contact with moving parts (belts, pulleys, etc.)
• Expulsion of tool parts
• Hazards related to incorrect tool assembly.
• Reverse bit rotation, caused by an incorrect electrical
connection.
• Dust inhalation when working without a dust collec-
tor.
• Danger of burns caused by contact with the glue.
operation are not permitted by unauthorised, or insuffi-
ciently trained personnel.
• Any modification made to the machine exempts the
manufacturer from any liability.
• The machine must be fastened to the floor.
• The operator must pay close attention to the machine
while it is in operation.
• Do not touch machine parts that are at high tempe-
ratures.
• The machine must be turned off when not in use.
• Disconnect the electrical power supply if the machine
will remain stopped for a substantial length of time.
The use of any machine tool may involve certain risks.
For this reason it is always recommended to pay close
attention when performing any task, no matter how
simple it is.
The greatest safety lies in the hands of the operator.
EB140 / Operating instructions - 73