Warnings Regarding Edgebander Use; Technical Specifications - Virutex EB140 Manual De Instrucciones

2.2 WARNINGS REGARDING EDGEBANDER USE

The edgebander has been designed to apply edges made
from melamine, PVC, ABS, wood and other similar mate-
rials to boards made from wood and wood products. The
machine trims only those boards with 90º edges.
The use of other materials unlike those mentioned above
is forbidden; the user shall be the only party liable for
any damage caused.
Always connect the dust collection equipment (see sec-
tion 4.7).

2.3 TECHNICAL SPECIFICATIONS

(Figures 3, 4 and 5)
(Figure 3)
Do not remove the safety protectors from the machine.
It is mandatory to read the safety warnings in section 3.
It is forbidden to make any modifications to the machine,
as doing so would violate its CE compliance statement.
The user is the only party liable for any da-
mage caused by inappropriate use of the
machine.
Working plane height: 902 mm
Minimum working width (board): 65 mm
Minimum working length (board): 140 mm
EB140 / Operating instructions - 69