TOHATSU MD 30B2 Manual Del Propietário página 18

16
SPECIFICATIONS
ENOM00604-0
75C2, 90C2
2
Item
Overall Length
Overall Width
Overall Height L·UL
Transom Height L·UL
Weight
Output
Max. Operating Range
Idle Speed
Engine Type
Number of Cylinder
Bore × Stroke
Piston Displacement
Exhaust System
Cooling System
Engine Lubrication
Starting System
Ignition System
Spark Plug
Alternator
Trim Position
Engine Oil
Gear Oil
Fuel Tank Capacity
Engine Oil Capacity
Gear Reduction Ratio
Fuel
Emission Control System
Operator Sound Pressure
(ICOMIA 39/94) dB (A)
Hand Vibration Level
(ICOMIA 38/94) m/s
Remark: Specifications subject to change without notice.
*1: The idling speed can be set to any of the three rpm ranges, 700, 800 or 900. (See page 53)
Tohatsu outboard is power rated in accordance with ISO8665 (propeller shaft output).
MODEL
mm (in)
mm (in)
mm (in)
mm (in)
L·UL kg (lb)
kW (ps)
-1
min (rpm)
-1
min (rpm)
mm (in)
3
cm (Cu in)
Genuine Gear Oil or API GL5, SAE #80 to #90, approx. 900 mL
L (US gal)
L (US gal)
Unleaded Regular Gasoline : R+M/2: 87 or higher RON: 91 or higher
2
75C2
EPTO
810 (31.9)
508 (20.0)
1540 (60.6) 1667 (65.6)
517 (20.4) 644 (25.4)
150 (331) 153 (337)
55.2 (75)
5150–5850
700/800/900
Direct fuel injection
3
86 × 72.7 (3.39 × 2.86)
1267
Through hub exhaust
Water cooling
Oil injection
Electric starter motor
Inductive Ignition
NGK IZFR6Q
12 V, 490 W (Max.)
2
Genuine Motor Oil or recommended one
—
Approx. 4 (1.06)
2.33 (12:28)
DFI (Direct Fuel Injection)
81.7
—
90C2
66.2 (90)
*1