Oil Filter - TOHATSU MD 30B2 Manual Del Propietário

Ocultar thumbs Ver también para MD 30B2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Check the wear and clogging for
each parts, and replace if necessary.
5. Remove fuel and any water or debris
from the cup, filter and hoses.
6. Reassemble all parts.
ENOM00096-A
Fuel filter (for fuel tank)
Water or dirt in the fuel tank will cause
engine performance problems.
Check and clean the tank at specified
times or after the outboard motor has
been stored for a long period of time
(over three months).
1. Remove the fuel pickup elbow of the
fuel tank by turning it counterclock-
wise
2. Clean the fuel filter and check the O-
ring. Replace it if necessary.
3. Reassemble all parts.
1
1. Fuel pick up
2. Filter
ENOM00725-0

Oil filter

Oil filter and oil tank. Check the oil tank
and/or filter for entrapped water and
dust.
1. Disconnect all pipes between the oil
2. Clean out foreign matter.
3. Refit the pipes to the oil tank and
4. For air purging, refer to ''Engine oil
30, 40, 50
1. Oil filter
75, 90, 115
2
ENOF00926-0
1. Oil filter
INSPECTION AND MAINTENANCE
tank and oil pump.
pumps, and then fill up with new
engine oil.
feeding'' (See page 38)
1
81
1
ENOF01346-0
10
ENOF01347-0

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Md 40b2Md 50b2Md 75c2Md 90c2Md 115a2

Tabla de contenido