Jog Dial Functions; Fast-Forward/Fast-Reverse; Track Cueing; Rotary Seach - Pioneer CDJ-400 Manual De Instrucciones

REV
TRACK
SEARCH
4, ¢
SEARCH
1, ¡
CUE
Jog dial

Jog dial functions

[Pitch Bend]
Rotate jog dial during playback.
When jog mode is set to [VINYL], operate the jog dial by touching
only the beveled sides of the dial. Different functions are enabled if
the top surface is touched.
¶ In proportion to the amount of rotation, the playback speed is ac-
celerated (FWD+) or decelerated (REV–). When in the reverse
mode, the playback speed accelerates when the dial is rotated in
the REV– direction, and decelerates when rotated in the FWD+ di-
rection.
¶ When dial rotation is stopped, playback reverts to the previous
speed.
[Scratch play]
Rotate jog dial during playback.
See "Scratch play" in the ADVANCED OPERATIONS.
[Frame search]
Rotate jog dial during pause.
When jog mode is set to CDJ, the audible pause mode is enabled and
when set to [VINYL], inaudible pause is performed; the audio is
played at a speed corresponding to the speed of jog dial rotation.
¶ The pause position will change in units of one frame.
¶ One rotation of the jog dial corresponds to 1.8 seconds of play-
back (135 frames).
[Cue point adjust]
☞P.17 "Changing the cue point"
[Super-Fast Search]
☞P.15 "Super-Fast search"
[Super-Fast track search]
☞P.15 "Super-Fast track search"
[Digital Jog Break]
☞P.16 "Digital Jog Break"
[Scratch Jog Effect]
☞P.16 "Scratch Jog Effect"

Fast-forward/fast-reverse

7 SEARCH buttons (1, ¡)
Press one of the SEARCH buttons (1, ¡) during playback.
Press and hold the ¡ button for fast forward the disc; press and
hold the 1 button for fast reverse.
¶ During playback of MP3s, fast-forward/fast-reverse are sup-
ported only for tracks inside the same folder.
7 Super-Fast search
Rotate the jog dial while pressing one of the SEARCH but-
tons (1, ¡).
¶ Hold down one of the SEARCH buttons (1, ¡) while turning
the jog dial in the desired direction to enter super-fast forward
SELECT
or super-fast reverse mode.
PUSH
4, ¢
¶ During Super-Fast search, the search direction is determined
by the direction the jog dial is turned. The direction of the
VINYL
pressed SEARCH button (1, ¡) is ignored.
VINYL
¶ When the jog dial rotation stops, the unit returns to playback
mode.
¶ When the SEARCH button (1, ¡) is released, Super-Fast
search is canceled.
¶ During playback of MP3s, fast-forward/fast-reverse is sup-
ported only tracks inside the same folder.

Track cueing

7 TRACK SEARCH buttons (4, ¢)
Press one of the TRACK SEARCH buttons (4, ¢).
¶ Each time the button is pressed, the track is cued in the direction
corresponding to the arrow on the button (during playback of a
track, to cue playback to the beginning of the preceding track,
press the 4 button twice). During playback of MP3s, the first
track found in the direction pressed will be cued, and only those
tracks inside the same folder are searched.
¶ When the Auto Cue function is turned ON, the track will be set in
cue standby position at the beginning of the track after cueing.
¶ When the TRACK SEARCH button (4, ¢) is held depressed,
cueing is performed continuously. If the button is held de-
pressed for two seconds or more, the cue speed increases.
¶ By pressing the 4 button twice at the beginning of the first
track (Track NO.1), the last track will be cued. During playback
of MP3s, when the 4 button is pressed the track with the
smallest number, the last track in the same folder will be cued.
¶ By pressing the ¢ button at the last track, the first track (Track
NO.1) will be cued. During playback of MP3s, when the ¢
button is pressed at the last track, the track with the smallest
number in the same folder will be cued.
7 Super-Fast track search
Rotate the jog dial while pressing one of the TRACK
SEARCH buttons (4, ¢).
¶ By turning the jog dial in the desired search direction while
pressing either of the TRACK SEARCH buttons (4, ¢), the
track number will be searched corresponding to the turning of
the jog dial.
¶ During Super-Fast track search, the search direction is deter-
mined by the direction of rotation of the jog dial. The direction
of the pressed TRACK SEARCH button (4, ¢) is ignored.
¶ When the TRACK SEARCH button (4, ¢) is released, Super-
Fast track search will be ended.
Rotary search
1. Turn the rotary dial (SELECT PUSH 4, ¢).
¶ The search will move one track for each calibration unit the dial
is rotated, corresponding to the direction of rotation. If the
search arrives at the root directory, the folder name [ROOT]
will be displayed.
¶ When text mode is selected, the folder name will be displayed
after rotary search, followed by the folder's beginning track
number and file name.
¶ Turn the rotary dial during playback to select tracks while the
track is being played. Turn the rotary dial before inserting discs
or a USB memory device to preset the track number.
2. Press the rotary dial (SELECT PUSH 4, ¢).
¶ The playback of the selected track will begin. If a folder is se-
lected, the hierarchy of that folder will be entered. Press the
BACK button to return one level higher in the folder hierarchy.
OPERATIONS (DJ PLAYER OPERATIONS)
15
<DRB1451>
En