Dimensional Drawings; Transport And Storage; Unpacking; Storage/Downtimes - Grundfos 384-511 Instrucciones De Instalación Y Funcionamiento

7.2 Dimensional drawings

Servomotor series 384-511 to 513
10
Fig. 4 Servomotor series 384-511 to 513
Servomotor series
384-511
384-512
384-513
Dimensions in mm
Servomotor series 384-711 to 717
Fig. 5 Servomotor series 384-711 to 717
Servomotor series
384-711
384-712 - 384-714
384-715 - 384-717
Dimensions in mm
L1
L1
222
208.5
221
L1
L1
204
221
222

8. Transport and storage

Only transport drives in their original
packaging. Do not use the protective
packaging as packaging for transport.
Caution
Do not subject drives to severe vibrations.
Do not throw or drop the servomotor.
If a pump is ordered together with a
servomotor, the servomotor is fitted onto
Note
the dosing pump so that it is ready for
connection.

8.1 Unpacking

• Retain the packaging for future storage or return,
or dispose of the packaging in accordance with
local regulations.
• Fit the servomotor as soon as possible after
unpacking it.

8.2 Storage/Downtimes

• Store the servomotor in a well ventilated, dry
room on a pallet or rack (protected from
moisture). Cover it with foil to protect it from dust
and dirt.
• Prevent condensation from forming (e.g. if the
temperature fluctuates).
If the servomotor is to be stored for longer than
4 months, observe the following points too:
• Insert a layer of absorbent material underneath
the drive's cover.
Keep the servomotor in a dry, cool place.
11