Fitting The Blade - SICE S 45 Basic Manual De Instrucciones

ENGLISH • Instructions manual
4) Fit the pin (15, Fig. E2) on to the arm and fix it using the 2 screws (16,
Fig. E2).
5) Secure the rod of the cylinder (17, Fig. E2) using the lock-nut (18, Fig. E2).
N.B.: Tighten until the threaded part projects from the lock-nut by about 10
mm. (see Fig. E3).
N.B.: Tightening down or backing off the lock-nut varies the minimum gap
between the bead breaker blade and the tyre rest.
WARNING: To avoid crushing the tyre beads, the gap between the blade and
the rest must be at least 40 mm.
6) With the aid of narrow-tip pliers, connect the spring (19, Fig. E2) to the
bead breaker arm (see Fig. E4).

FITTING THE BLADE:

1) Remove the bolt (20, Fig. F) and the lock-nut (21, Fig. F) from the bead
breaker blade, taking care to keep the two shim washers (22, Fig. F) in place.
2) Fit the blade on the bead breaker arm (see Fig. F) taking the greatest care
to ensure that the two shim washers are correctly positioned.
3) Fix the blade to the arm using the nut removed earlier and the lock-nut
(see Fig. F).
FITTING THE TANK (S 45 BASIC GP ONLY):
1) Remove the four 8x16 bolts already fitted into the tank fixing holes on
the machine body.
2) Fit the elbow (25, Fig. F1) onto the valve (26, Fig. F1) sticking out of the
back of the machine body and fix it with the spin (27, Fig. F1).
3) Fit the tank on the body and secure it with the four TE M 8x16 bolts
removed earlier.
28
31
33
32
34
FITTING THE READOUT UNIT (S 45 BASIC GP ONLY):
30
1) Fix the supporting upright (30, Fig. F2) with the 4 screws (31, Fig. F2)
into the holes provided on the side and in the rear of the tyre changer.
2) Fix the readout unit (32, Fig. D2) to the supporting upright (33, Fig. F2)
using the 2 screws (25, Fig. F2).
3) Connect the hose (34, Fig. F2) labelled "A" to the union in the bottom of
29
35
the readout unit (35, Fig. F2) labelled in the same way.
F2
Then connect the hose (28, Fig. F2) to the union (29, Fig. F2).
21
25
27
10 mm
20
22
27
26
S 45 Basic
E3
E4
F
F1