Data Management; Menu Structure Of Data Menu; Measurement Data - Mettler Toledo SevenCompact S230 Instrucciones De Manejo

7 D ata management
7.1 M enu structure of data menu
1. Measurement data
1. Review
2. Transfer
3. Delete
4. Export to USB-stick
2. Calibration data
1. Review
2. Transfer
3. Delete
4. Export to USB-stick
7.2 M easurement data
Review
All
All stored measurement data can be reviewed; the most recent data saved appears on the display.
●
Press Transfer to send the measurement data (current single set) to the printer or PC.
Partial
The measurement data can be filtered according to 3 criteria.
●
Memory number (from MXXXX to MXXXX)
●
Sample ID
●
Measurement mode
Memory number
1 Enter the memory numbers of the data and press Select.
The measurement data is displayed.
2 Scroll through the measurement data to review all measurements between the two memory
num b ers.
3 Press Transfer to send the measurement data (current single set) to the printer or PC.
Sample ID
1 Enter the sample ID and press OK.
The meter finds all stored measurements with this sample ID.
2 Scroll through the measurement data to review all measurements with the entered sample ID.
3 Press Transfer to send the measurement data (current single set) to the printer or PC.
Measurement mode
1 Select a measurement mode from list. The meter finds all stored measurements of the select-
ed mea s ure m ent mode.
2 Scroll through the measurement data of the selected measurement mode.
3 Press Transfer to send the measurement data (current single set) to the printer or PC.
3. ISM data
1. Initial Calibration Data
2. Calibration History
3. Maximum Temperature
4. Reset ISM
Data management 33