System Settings - Mettler Toledo SevenCompact S230 Instrucciones De Manejo

5.6 S ystem settings
The system settings menu is protected by a PIN. Upon delivery, the PIN is set to 000000 and is
acti v at e d. Please change the PIN to prevent unauthorized access.
1. Language
The following languages are available for the system: English, German, French, Spanish, Italian,
Por t uguese, Chinese, Japanese, Korean and Russian.
2. Time and date
When starting the meter for the first time, the display for entering time and date appears auto m at i -
cal l y.
In the system settings, two time and four date display formats are available:
●
Time
24-hour format (for example, 06:56 and 18:56)
12-hour format (for example, 06:56 AM and 06:56 PM)
●
Date:
28-11-2010 (day-month-year)
11-28-2010 (month-day-year)
28-Nov-2010 (day-month-year)
28/11/2010 (day-month-year)
3. Access control
PIN settings are available for:
1. System settings
2. Deleting data
3. Instrument login
1 Switch PIN protection for the required access control ON. The window for entering an alphanu-
mer i c PIN appears.
2 Enter an alphanumeric PIN (max. 6 characters).
The input window for PIN verification appears.
3 Confirm PIN.
A maximum of 6 characters can be entered as PIN. In the factory default settings, the PIN for sys-
tem settings and deleting data is set to 000000 and is activated, no instrument login password is
set.
4. Beep
An acoustic signal can be switched on in the following three cases:
1. Key is pressed
2. Alarm/warning message appears
3. Measurement is stable and has endpointed (stability signal appears)
5. Expert/Routine modes
The meter has two working modes:
●
Expert mode: the factory default setting enables all functions of the meter.
●
Routine mode: some of the menu settings are blocked.
24 Setup