Calibration Data - Mettler Toledo SevenCompact S230 Instrucciones De Manejo

Transfer
All or partially stored measurement data can be transferred by filtering the measurement data. The
fil t er works as described above in "Review".
●
Press Select to send the filtered measurement data to the printer or PC.
Delete
All or partially stored measurement data can be deleted by filtering the measurement data. The filter
works as described above in "Review".
Deletion is protected by a PIN. Upon delivery, the PIN is set to 000000. Change the PIN code to
pre v ent unauthorized access.
Export to USB-stick
All or partially stored measurement data can be transferred to a USB-stick. The filter works as de-
scribed above in "Review". More information about the file format is given in "Operating the meter:
Data transfer"
●
Press Transfer to export the filtered measurement data to the USB-stick.
7.3 C alibration data
Calibration data can be reviewed, transferred and deleted. The latest calibration per sensor ID is
stored in the memory. When using ISM-Sensors, the latest 5 calibration data can be viewed/printed
(See "Data management: ISM data").
Review
1 Press Select.
A list of calibrated sensor IDs appears.
2 Select a sensor ID from the list.
The calibration data is shown for this sensor ID
— or —
3 Press and hold CAL for 3 seconds in the measurement screen.
4 Press Transfer to send the displayed calibration data to a printer or PC.
Transfer
1 Press Select.
A list of calibrated sensor IDs appears.
2 Select a sensor ID from the list.
The calibration data of the selected sensor ID is transferred to a printer or PC.
34 Data management