Mettler Toledo SevenCompact S230 Instrucciones De Manejo página 38

Initial calibration data
When an ISM
trans f erred. The following data is included:
●
Response time
●
Temperature tolerance
●
Cell constant
●
Cell constant tolerance
●
Type (and name) of electrode (for example, InLab Expert Pro ISM)
●
Serial number (SN) and ordering (ME) number
●
Production date
Calibration history
The last 5 calibrations data stored in ISM
trans f erred.
Maximum temperature
The maximum temperature that the ISM
i t ored automatically and can be reviewed for the evaluation of the electrode lifetime.
Reset ISM
®
The calibration history in this menu can be deleted. This menu is protected by a deletion PIN. Upon
deliv e ry, the PIN for deletion is set to 000000. Change the PIN to prevent unauthorized access.
36 Data management
sensor is connected, the initial calibration data in the sensor can be reviewed or
®
sensor including current calibration can be reviewed or
®
sensor has been exposed to during measurement is mon-
®