Device Description; Front View; Rear View - Bosch EPS 118 Manual Original

5.4

Device description

5.4.1

Front view

4
3
Fig. 1: Front view
1 Touchscreen
2 Emergency stop switch
3 Oil level display
4 Protective cover with safety switch
5.4.2

Rear view

1
2
3
4
5
6
7 8
Fig. 2: Rear view
1 Device socket with on/off switch and fuse
2 Maintenance unit with water separator
3 Plug-in hose nipple for compressed-air connection
4 Drain valve with drain plug for manual condensate-draining
(0 = open, S = closed)
5 Test oil drain shut-off valve
6 Test oil filter
7 Drain plug for oil collecting trough
8 USB port (max. 500 mA)
Robert Bosch GmbH
1
2
Product description | EPS 118 | 59
5.4.3 Components for testing
10
9
8
7
6 5 4
Fig. 3: Components for testing
1 Injected fuel quantity test connection
2 High-pressure connection
3 Test connection for return quantity (CRI/CRIN/piezo CRI)
4 Clamping bolt for securing CRI/CRIN or piezo CRI
5 Injection chamber
6 Clamping bush for CRI/CRIN or piezo CRI
7 Injection chamber holder
8 Injection chamber height adjusting clamping bolt
9 Test oil filler port (ISO 4113)
10 Sockets (X7) or CRI/CRIN or piezo CRI electrical connection
5.4.4 Symbols and connection table for CRI/CRIN,
and CRI Piezo tests
Compo- Return quantity
nent test connection
CRI/
CRIN
CRI
Piezo
5.4.5 USB port
The USB port (Fig. 2, item 6; max. 500 mA) is provi-
ded for connection of a USB devices (e. g. WLAN USB
adapter, USB stick or USB printer).
i
With the aid of a USB hub, several USB devices can
be connected simultaneously to the EPS 118. The
USB hub must have its own voltage supply.
i
It is only permissible to connect printers approved
by Bosch.
458900-12_Pal
Injected fuel Connecting
quantity test cable X7
connection
Yes
|
1 689 989 300 2020-03-24
en
1
2
3