Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Hose assembly 1 684 462 671
The hose assembly 1 684 462 671 connects the test
oil return of VDO piezo CRIs to the return quantity test
connection (Fig. 3, item 3).
1.684.462.671
YYYY-MM VDO
Fig. 17:
Hose assembly 1 684 462 671
Adapter cable 1 684 463 618 (Denso CRI / piezo CRI)
For actuation of Denso CRIs / piezo CRIs using con-
nection X7 of the EPS 118 (Fig. 3, item 10).
Piezo
1 684 463 618
FD: MM/YYYY
Denso Injector
Fig. 18:
Adapter cable 1 684 463 618
Connection cable 1 684 448 333
For actuation of third-party CRIs using connection X7
of the EPS 118 (Fig. 3, item 10). The injector-specific
adapter cable is also needed to connect to the
CRI / piezo CRI.
458900-18_Pal
Fig. 19:
Connection cable 1 684 448 333
Adapter cable 1 684 463 956 (non-Bosch CRI univer-
sal cable)
!
Pay attention to the polarity when connecting
adapter cable 1 684 463 956 to the injector. Rever-
se polarity may damage the injector irreversibly.
Observe the injector manufacturer's connection
instructions.
For actuation of third-party CRIs using connection X7
of the EPS 118 (Fig. 3, item 10). The flat plug with the
red dot corresponds to pin 1 and is the positive termi-
nal.
458900-22_Pal
Fig. 20:
Adapter cable 1 684 463 956
Adapter cable 1 684 463 957 (VDO/Continental Piezo)
For actuation of VDO/Continental piezo CRIs using
connection X7 of the EPS 118 (Fig. 3, item 10).
458900-21_Pal
Fig. 21:
Adapter cable 1 684 463 957
Robert Bosch GmbH
2,4
458900-35_Pal
458900-32_Pal
Product description | EPS 118 | 65
Adapter cable 1 684 463 954 (Delphi Euro3/4)
For actuation of Delphi Euro3/4 CRIs using connection
X7 of the EPS 118 (Fig. 3, item 10).
458900-20_Pal
Fig. 22:
Adapter cable 1 684 463 954
Adapter cable 1 684 463 955 (Delphi Euro 5)
For actuation of Delphi Euro5 CRIs using connection
X7 of the EPS 118 (Fig. 3, item 10).
458900-19_Pal
Fig. 23:
Adapter cable 1 684 463 955
5.4.14
Accessory set 1 687 016 038 (special
accessory)
Accessory set 1 687 016 038 contains all the accesso-
ries used for connecting and testing Bosch CRIN to the
EPS 118.
Return adapter connection for CRIN with divided
return quantity
The return adapter connects the CRIN with divided
return quantity to the test connection for the return
quantity (Fig. 3, item 3) on the EPS 118. The hose as-
sembly 1 684 462 570 (Fig. 9, item 1) and Bosch CRIN
hose fitting 1 683 386 192 (Fig. 9, item 4) are needed
for connecting to the test connection for the return
quantity (Fig. 3, item 3).
Fig. 24:
Connection of return adapter
en
|
1 689 989 300
2020-03-24
Publicidad
Tabla de contenido
