Electromagnetic Immunity - Digi Connect WS Manual De Referencia De Hardware

Electromagnetic immunity

Connect WS is intended for use in electromagnetic environments within the limits specified below. The customer or
user of Connect WS should assure that it is used in such an environment.
Immunity test
Conducted RF IEC 61000-4-6
Radiated RF IEC 61000-4-3
Note Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey,
should be less than the compliance level in each frequency range. Interference may occur in the
vicinity of equipment marked with this symbol:
Connect WS Hardware Reference Manual
Electromagnetic Guidance and manufacturer's declaration
IEC 60601 test level
3 Vrms 150 kHz to 80 MHz
3 V/m 80 MHz to 2.5 GHz
Electromagnetic environment
Compliance level guidance
3 V See next section for
recommended separation
distance
Over the frequency range 150 kHz
to 80 MHz, field strengths should
be less than 3 V/m.
3 V/m See next section for
recommended separation
distance
42