Connecting To An Analog Component; Connecting To A Digital Component - JVC TH-M65 Manual De Instrucciones

Getting started

Connecting to an analog component

You can enjoy the sound of an analog component such as a VCR, TV, or Cassette recorder with this system. Use RCA pin plug cords (not
supplied) for connection.
S-video cord
(not supplied)
or
Composite video cord
(not supplied)
A B
NOTE
• The signals input to the VIDEO jack of the VCR IN jacks will be output only from the VIDEO jack of the VIDEO OUT jacks, not from the S-VIDEO
jack of the VIDEO OUT jacks.

Connecting to a digital component

You can enjoy the sound of a digital component such as a DBS (Direct Broadcast Satellite) tuner or MD recorder with this system. Use digital
optical cord (not supplied) for connection.
TH-M45
Digital optical cord
(not supplied)
DBS tuner
* For TH-M65 only:
This system can send digital audio signals to digital component such as MD recorder or AV receiver.
NOTE
• Only digital audio signals can be input when selecting "DBS" as the source to play. (A pg. 20) When connecting a video component such as a DBS
tuner, operate this system to listen to the sound.
Red
White
RCA pin plug cord
(not supplied)
C
VCR
TH-M65 *
To digital optical output
A To composite video output
B To S-video output
C To audio output
C
TV
Center unit
Digital optical cord
(not supplied)
To digital optical input
MD recorder
Center unit
C
Cassette recorder
Before connecting a digital
optical cord, unplug the
protective plug.
14