Using The Surround Mode - JVC TH-M65 Manual De Instrucciones

Sistema de cinema de dvd digital
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Creating realistic sound fields
IMPORTANT
Before using the remote control for the
following operation;
• Set the remote control mode selector to
AUDIO.
Remote control
mode selector
31

Using the surround mode

The system is set up to automatically select the optimal surround
mode for input signal from digital multichannel software.
When playing back 2 channel source, you can select the desired
surround mode manually.
On the remote control:
7 When playing back digital multichannel software
The appropriate multichannel surround mode is automatically
activated.
"DOLBY D":When a software encoded with Dolby Digital is
"DTS":
In these cases, you can only turn on or off ("SURR OFF") the
Karaoke mode
surround mode.
switch
7 When playing back 2 channel source
You can select either mode of Dolby Pro Logic II (PL II MOVIE/
PL II MUSIC) or one of the DSP modes (LIVE CLUB/DANCE
CLUB/HALL/PAVILION/ALL CH ST.).
Press SURROUND (MODE).
The surround mode is turned on and the current surround mode
appears on the display window.
Each time you press the button, the surround mode changes as
follows;
]
PL II MOVIE
CLUB
beginning)
For details on each mode, see pages 29 and 30.
To turn off the surround mode
Press SURROUND (ON/OFF).
Each time you press the button, the surround mode turns on and off
alternately.
SURR OFF (surround off)
(surround on)
NOTE
• When selecting "PL II MUSIC", "PL II MOVIE", "DOLBY D" or
"DTS" as the surround mode, the SURROUND indicator lights.
• When selecting one of the DSP modes ("LIVE CLUB"/"DANCE
CLUB"/"HALL"/"PAVILION"/"ALL CH ST.") as the surround
mode, the DSP indicator lights.
• For Dolby Digital 2 channel software, you can select "PL II MUSIC"
or "PL II MOVIE".
Storing adjustments — auto memory
This system memorizes the surround mode settings for each source.
• When you turn the power off:
When turning the power on again, the memorized settings for the
current source are automatically recalled.
• When you change the source:
The memorized settings for the newly selected source are
automatically recalled.
NOTE
• If the source is FM or AM, you can assign a different setting for each
band.
played back
When a software encoded with DTS Digital
Surround is played back
]
]
PL II MUSIC
]
]
]
HALL
PAVILION
ALL CH ST.
O
current selected mode
]
LIVE CLUB
DANCE
]
(back to the

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido