Troubleshooting; Corrective Action - SATA SATAminijet 1000 K Instrucciones De Servicio

Operating Instructions SATAminijet 1000 K/H RP/HVLP
Notice!
Risk of material damage from improper cleaning tools
Never clean soiled bore holes with improper objects. Even the slighted
damage can affect the spray pattern.
→ Use SATA nozzle cleaning needles (# 62174) or (# 9894).
Information!
In rare instances, some parts of the paint spray gun may have to be re-
moved to clean it thoroughly. If disassembly is required, limit this only to
the parts that come in contact with material as a result of their function.
■ Flush the paint spray gun well with a thinner.
■ Clean air nozzle with a paintbrush or brush.
■ Lightly grease moving parts with gun grease.

11. Troubleshooting

Only trained experts are permitted to rectify the malfunctions described
below.
If it is not possible to rectify a malfunction using the remedies described
below, send the paint spray gun in to the SATA Service Department (see
Chap. 16 for address).
Malfunction
Uneven spray jet (pul-
sating / sputtering) or
air bubbles in suction
cup.
Cause
Paint nozzle not se-
cured tightly.
Damaged or soiled air
distribution ring.

Corrective action

Tighten paint nozzle
using universal wrench.
Replace air distribution
ring (see 9.2).
US
553