Descargar Imprimir esta página

Genie CHAINLIFT 1022 Manual De Instrucciones página 3

Ocultar thumbs Ver también para CHAINLIFT 1022:

Publicidad

INTELLICODE ® Rolling Code Security
System.
An electronic
rolling code system that enhances
the security of
the door opener by continuously
changing the access code
each time the remote control is used. The door opener
responds to each new code only once. An access code copied
from a working system and tried again will not control the door
opener.
Lighted
Wall Button*
Operates door opener from inside garage.
(Refer to section
3)
and Car2U ® compatible.
Follow the Homelink
® or Car2U ® instructions
in your car
owner's
manual.
I *Opener Must be installed with the
included Wall Button,
**Safe'T-geam®
Safety Reverse System
MUST be installed
to close
door,
Safe-T-Beam ® Non-Contact
Reversing
System**.
Puts an invisible beam across the door opening. The door stops
and reverses to the full open position if anything passes
through the beam. Red or green LED indicator lights on the
power head provide a self diagnostic
code if an operational
problem exits. (Refer to Section
10.)
Safe-T-Reverse
®Contact
Reversing
System.
Automatically
stops and reverses a closing door within 2
seconds of contact with an object. (Refer to Section
6.)
Safe-T-Stop ® Timed Reversed
System.
Automatically
opens a closing door if it fails to close completely
within 30 seconds.
ForceGuard
TM
Control.
Features adjustable
open and close force settings. For
maximum safety, these must be set to the minimum force
required to fully open and close the door. (Refer to Section
6.)
Relay Monitoring
System.
Automatically
stops and reverses a closing door if the closing
relay malfunctions.
Watch Dog
TM
Monitoring
System.
Automatically
stops and reverses a closing door if the
Safe-T-Beam ®System**
notes an operational
problem.
Automatic
Lighting System.
One bulb lighting supplies up to 60 watts of light for safer
evening exits and entries. Turns ON when door is activated and
automatically
turns OFF 3 minutes later.
Manual Emergency
Release.
Manually releases door from door opener. Use during a power
failure or other emergency
to allow manual opening and closing
of door. (Refer to Section
6.)
PN# 36420Supplement,
10/27/2008
3

Publicidad

loading

Este manual también es adecuado para:

Chainlift 1024Chainlift 1042Beltlift 1022Beltlift 24Beltlift 42