Descargar Imprimir esta página

Husqvarna TE 250/2006 Manual De Oficina página 707

Publicidad

NOTE PER I MODELLI USA/CDN- AUS
NOTES FOR USA/CDN- AUS MODELS
NOTE POUR LES MODÈLES USA/CDN- AUS
ANMERKUNG FÜR MODELL USA/CDN- AUS
NOTAS POR LOS MODELOS USA/CDN- AUS
NOTES FOR "AUS" MODEL
Tampering Warning:
Tampering with Noise Control System Prohibited. Federal law prohibits the following acts or causing therefor:
1) The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any device
or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate
purchaser or while it is in use, and
2) the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.
Among those acts presumed to constitute tampering are the acts listed below.
1) Removal of, or puncturing the muffler, baffles, header pipes or any other component which conducts exhaust gases.
2) Removal or puncturing of any part of the intake system.
3) Lack of proper maintenace.
4) Replacing any moving part of the vehicle, or parts of the exhaust or intake system, with parts other than those specified by the
manufacturer.
This product should be checked for repair or replacement if the motorcycle noise has increased significantly through use. Otherwise,
the owner may become subject to penalities under state and local ordinances.
Part. N. 8000 A5911 (03-2006)
Z.5

Hide quick links:

Publicidad

loading