Fig. 5: Alignment Of The Sensing Face On The - SICK IN4000 Direct Manual Del Usuario

Operating instructions
IN4000 Direct
Fig. 5: Alignment
of the sensing face
on the safety
switch
8012183/ZWH0/2018-06-05
Subject to change without notice
Mounting
a
c
e
⋅ Mount safety switch with the aid of a mounting
bracket at the selected mounting location, if possible
so that it cannot be detached, and fasten in the
selected position. Tighten self-locking screws to
1.0 Nm.
© SICK AG • Germany • All rights reserved
b
d
f
en
Chapter 4
71