Correct Use; Foreseeable Misuse; General Safety Notes And Protective Measures - SICK IN4000 Direct Manual Del Usuario

Operating instructions
IN4000 Direct
8012183/ZWH0/2018-06-05
Subject to change without notice
On safety
2.3

Correct use

The safety switches of the IN4000 Direct series must
be used only as defined in section 2.2 "Applications of
the safety switches" on page 56. The safety switches
are only allowed to be installed by qualified safety
personnel and are only allowed to be used on the
machine on which they have been installed and
initialized by qualified safety personnel as per these
operating instructions.
The safety switch must only be used within the limits of
the prescribed and specified technical data and
operating conditions at all times.
All warranty claims against SICK AG are forfeited in the
case of any other use, or alterations being made to
devices, even as part of their mounting or installation.
2.4

Foreseeable misuse

Among others, the safety switch is not suitable for the
following applications:
• in an environment with chemical or biological media
(solid, liquid, gaseous)
• in environments with enhanced ionizing radiation
2.5 General safety notes and
protective measures
The IN4000 Direct safety switch provides a personnel
protection function. Incorrect installation or manipula-
tion can result in serious injuries.
The IN4000 Direct safety switch complies with the
following safety requirements:
• SIL3 according to IEC 61 508,
• SILCL3 according to EN 62 061,
• Performance Level e as per EN ISO 13 849-1
(application-dependent).
© SICK AG • Germany • All rights reserved
en
Chapter 2
57