Installation - Agilent Technologies Turbo-V 2K-G Serie Manual De Instrucciones

16 Instructions for Use

Installation

Installation
Cause its weight, the pump must be handled by means of suitable moving and
WARNING!
handling tools. Use the suitable handling kit eyebolts screwed into the holes
of the pump body.
Do not remove the bolted cap before connecting the tur-bopump to the system.
CAUTION!
Remove connector protections only after fixing the turbopump to the system.
CAUTION!
Figure 2
Do not install or use the pump in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk. During
operation, the following environmental conditions must be respected:
288/372
maximum pressure: 2 bar above atmospheric pressure
Turbo-V 2K-G Pumping System User Manual / 87-900-968-01 (G)