Powering On The Monitorr - Agilent Technologies Turbo-V 2K-G Serie Manual De Instrucciones

17 Technical Information
MoniTorr
MoniTorr
An integrated MoniTorr card is suitable for the Tur-bo-V 2K-G. This
feature allows the pump's vibration spectra acquisition and
download. The necessary hardware is totally integrated into the
controller and consists of one PCB card and one accelerometer fixed
on the controller's side.
Figure 24
The MoniTorr card allows to:

Powering on the MoniTorr

At pump's power-on, the POWER LED comes on and the system
proceeds with its self-configuration routine. Data acquisition and
processing will be automatically activated at the moment in which
the turbo pump reaches its maximum speed (Normal Operation). The
MoniTorr card is powered from the controller.
330/372
perform programmed maintenance on the turbopump
continuously monitor the turbopump operating conditions
identify the wear conditions of one or two bearings.
Turbo-V 2K-G Pumping System User Manual / 87-900-968-01 (G)