Modifying The Parameters - Agilent Technologies Turbo-V 2K-G Serie Manual De Instrucciones

Modifying the Parameters

The operator can change the configuration of the Monitorr
parameters.
To change the configurations select one of the Monitorrs connected to
the network by positioning the cursor in the row of the Monitorr to
be modified and clicking the left mouse button. Then click the right
mouse button, select Remote Device and then Set Counters. You are
now prompted to enter a password; the password to be entered is:
AGILENT.
The following three parameters are displayed with their respective
default values:
To change these parameters, enter the desired value and then save.
Provided below is a description of the parameters that can be
modified:
Turbo-V 2K-G Pumping System User Manual / 87-900-968-01
Acquisition time:
Save time:
Alarm time:
Acquisition time: Defines the time frame between one MoniTorr
acquisition and the next. It is suggested that you keep this
parameter at its default value.
Save time: Defines the time frame between two successive storage
operations to the MoniTorr's local memory of the acquisition
indicated above. Every acquisition is summed to previous in
order to obtain in memory only the last average spectrum.
Alarm time: Defines the timeout after which an alarm condition is
signalled.
60 (seconds)
125 (minutes)
120 (seconds)
(G)
Technical Information
MoniTorr
341/372
17