Controller Description - Agilent Technologies Turbo-V 2K-G Serie Manual De Instrucciones

17
Technical Information
Description of the Turbo-V 2K-G
The pump can operate in any position and must be supported on the
high vacuum flange. The connection of the forevacuum on the side of
the pump is a KF 40 NW flange.
Figure 8

Controller Description

The dedicated controller is a solid-state frequency converter which is
driven by a single chip micro-computer.
The controller can be operated by a remote host computer via the
serial connection (a Windows-based software is available as an
option), or by the remote I/O connector.
At every power-up the controller is in "Remote Mode" of operation
and accepts only commands from J1 remote I/O connector. To put it
in "Serial Mode" of operation please refer to the serial com-mand
table.
Turbo-V 2K-G Pumping System User Manual / 87-900-968-01 (G) 305/372