Monitorr Connectivity Kit Installation Procedure - Agilent Technologies Turbo-V 2K-G Serie Manual De Instrucciones

17 Technical Information
MoniTorr
Figure 25
The protocol converter is not strictly needed for MoniTorr operation. It is also
NOTE
possible to use the standard RS232 to RS485 converter and the standard optical
to RS232 converter.
In order to install and operate the MoniTorr card of the Turbo-V 2K-G
it's necessary to get the Monitor Connectivity Kit (P/N 969-9260). The
user should install it on any windows based PC with at least one
RS232 port.

MoniTorr Connectivity Kit Installation Procedure

1
2
Figure 26
332/372
Network connection
Install the File VT Serial Address Configurator on PC (launch VT-
SAC\setup.exe on CD Rom)
Connect the RS232 cable between the PC se-rial port and the first
TV 2KG serial port
Turbo-V 2K-G Pumping System User Manual / 87-900-968-01 (G)