Name And Function Of Other Operational Buttons - JUKI HZL-G serie Manual De Instrucciones

Name and function of operational buttons
Pattern selection
button
1
Zigzag width
adjustment buttons
2
Stitch length
adjustment buttons
3
Automatic lock
G210
stitch and thread
trimming button
4
Automatic lock
G110
stitch
Needle up/down
G210
button /
Needle stop position
switching button
5
Needle stop
G110
position
switching button
Pattern selection
mode switching
button
6
Memory button
7
Clear button
8
Pattern adjustment
button
9
This is used to choose the pattern.
Left side for number of tens.
Right side for number of units.
This is used to change the zigzag width and the needle position.
This is used to change the stitch length.
When it is pressed, symbol "
The machine will automatically lock stitches at sewing-start and sewing-end
and then trim both threads.
When it is pressed, symbol "
The machine will automatically lock stitches at sewing-start and sewing-end.
While sewing machine stops sewing, press this button to change up/down position of
the needle instantly. When the needle is in up position and press it, then needle moves
down and when the needle is in down position and press it, then needle moves up.
When the button is pressed continuously, it is programmable and you can choose the
needle stop position either up or down.
When it is pressed, either symbol "
When sewing with symbol "
When sewing with the symbol "
When it is pressed, either symbol "
When sewing with symbol "
When sewing with the symbol "
This is used to change the pattern selection mode.
Practical patterns / One point patterns (Decorative patterns)
Letters
This is used to store the selected letters or one point patterns into memory.
This is used to delete the selected stitch pattern. When the button is pressed just one
time, the selected pattern will be deleted and when it is pressed continuously, all the
saved stitch patterns will be deleted.
This is used to adjust the shape of patterns.
(Refer to page 80)
" will be shown on the screen.
" will be shown on the screen.
" or " " will be shown on the screen.
", the needle stops at its highest position.
", the needle stops at its lowest position.
" or " " will be shown on the screen.
", the needle stops at its highest position.
", the needle stops at its lowest position.
/
20