In The Event Of Faults Or Errors - SICK Stsndart IN4000 Instrucciones De Servicio

Chapter 6

WARNING

WARNING
86
Commissioning and operation
6.3

In the event of faults or errors

Cease operation if the cause of the malfunction has
not been clearly identified!
= Stop the machine if you cannot clearly identify or
allocate the error and if you cannot safely rectify the
malfunction.
= Do not attempt to repair the IN4000 Standard
safety switch.
= Replace faulty devices prior to placing the machine
back in operation.
Behavior in case of recoverable errors:
= In the case that recoverable errors occur (see
section 3.4.2 "Indications in the adjustment mode"
on page 66), rectify this error without delay.
SICK support
If you cannot rectify an error with the help of the
information provided in this chapter, please contact
your local SICK subsidiary (see on the rear of these
operating instructions).
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice • 8010934/YTC9/2016-04-01
Operating Instructions
IN4000 Standard