Set Up Your System - SURE petcare SureFlap Microchip Cat Flap Connect Manual Del Usuario

Set up your system

Once you have successfully downloaded the Sure Petcare app, you will need to plug in your
Hub and set it up. Once your Hub is set up you will be asked to connect it to both the Cat Flap
and the app. Please follow the steps below:
1
2
3
Sure Petcare
4
App!
Your Hub may receive a software update. If you see solid red lights during setup, don't
panic, your Hub is updating its software. Once complete the Hub will reboot and you'll
see the light sequence detailed in step 3.
Plug one end of the Ethernet cable into the base of your
Hub and the other end into a spare Ethernet port on your
router.
Assemble the power supply and plug it into your power
outlet. Plug the other end of the cable into the base of
your Hub.
Your Hub's 'ears' will start alternating red and then green.
When both ears remain solid green your Hub is ready.
If the ears fail to do this sequence please see page 14
for more information.
In order to complete the setup of your Microchip Cat Flap
Connect system you will need to follow the remaining
steps on the Sure Petcare app. Once all the elements of
your system are connected you can start controlling your
Cat Flap's features remotely!
EN
12