Removing A Tire; Preparations For Removal - Bosch TCE 4460 Manual Original

5.3

Removing a tire

i
Please refer to the publications of Wdk, which are
available in German and English.
(www.wdk.de: English > Downloads)
5.3.1

Preparations for removal

!
Ensure that the compressed-air valve is not damaged
during tire removal.
1. Use the appropriate tool to pull out the valve needle.
« The tire is fully deflated.
i
Before starting the unseating procedure on the tire,
set the position of the adjusting sleeve with 3 or 4
positions depending on the tire width and the posi-
tion of the bead breaker blade depending on the tire
diameter.
i
In some machine versions, the adjusting sleeve with
4 positions is a special accessory.
Robert Bosch GmbH
Operation | TCE 4460 | 57
Fig. 48: Adjusting sleeve settings
Item
1
2
3
Tab. 6: 3 positions
Item
1
2
3
4
Tab. 7: 4 positions
L1 L2
180 395
110 340
60 270
L1 L2
180 395
155 380
110 340
60 270
|
1 695 105 428 2013-11-04
en