Maintenance And Cleaning; Repair; Taking Out Of Service; Information For Energy Saving - Franke SMART PLUS SGP 62 M Serie Manual De Instalación Y Servicio

Ocultar thumbs Ver también para SMART PLUS SGP 62 M Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
SGP 62 M _/F / SMP 62 M _/F / SMP 66 M _/F / CF 65 M _/F
Risk of overheating and malfunction
of the oven due to blocked ventilation!
Z
X
Never cover the inside walls of the oven
with aluminium foil.
Z
X
Do not block the ventilation of the fan or the
cooling openings above the oven door.
Risk of burns!
Z
X
When opening or closing the door, always
hold the door handle in the middle.
Risk of electric shock due to
damaged device!
Z
X
Do not switch on a damaged device.
Z
X
Switch off the fuse in the fuse box.
Z
X
Contact the customer service.
Risk of electric shock!
Z
X
Do not touch the device with wet parts of
your body.
Z
X
Do not use the device when barefoot.
Z
X
Do not pull on the device or power cable to
unplug it from the socket.

Maintenance and cleaning

Before maintenance or cleaning:
Z
X
Disconnect the device from the power supply,
e.g., switch off the fuse in the fuse box.

INFORMATION FOR ENERGY SAVING

The operating mode TOP FAN ASSISTED
COOKING consume less energy than the other
cooking functions available.
Z
X
Avoid frequent door opening.
Z
X
Preheat as rapidly as possible.
Risk of electric shock due to
entering liquid!
The device contains electrical components.
Z
X
Make sure that no liquid enters the interior
of the device.
Z
X
Do not use pressurised steam to clean the
device.
Z
X
Do not use a wet cloth to clean the
operating elements.

Repair

Z
X
Do not allow anyone except qualified
personnel to install or repair the appliance.
Z
X
Contact a service centre authorised by the
manufacturer or qualified personnel in the
following cases:
Immediately after unpacking, in the event
of doubts regarding the integrity of the
device
During installation (according to the
manufacturer's instructions)
Doubts regarding the correct operation of
the device
Malfunction or poor operation
Replacing the power socket if incompatible
with the power plug of the device
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.

Taking out of service

Z
X
If the oven is no longer to be used, call the
service centre or qualified personnel to
disconnect it from the power supply.
Z
X
Preheat the oven chamber only if the baking
results depend on this operation.
Z
X
If a recipe for a gratin uses residual heat for
longer than 30 minutes, turn the appliance
off 5–10 minutes before the end of cooking.
– 5 –
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Smart plus smp 62 m serieSmart plus smp 66 m serieCountry flat cf 65 m serie

Tabla de contenido