1- Cardans Lubrication; 1- Drum Gearbox Lubrication; 1- Lubrication Of The Platform's Gears - Nogueira FTN-1900 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. Maintenance
6.16.3- Cardans lubrication
Using a grease gun or a pump, grease the
8 hours
8 hours
20 hours
cardan crossheads every 8 working hours.
Lubricate the shafts every 20 hours.
Use lithium-based soaps lubrication greases,
grade NLGI-2.
6.16.4- Drum gearbox lubrication
The gears from drum gearbox are lubricated
with lithium soap grease, NLGI 00 (Example:
LUBRAX LITH-00).
It is recommended to remove any old grease
and add new grease according to the above
specification.
It is recommended to remove all old grease
GEARBOXES
and add new grease according to the above
specification.
Grease capacity of drum gearbox: 3 kg.
To complete the grease, you can remove the
A
breather plug (A) and lubricate through the
hole.
6.16.5- Lubrication of the platform's
gears
When performing the annual machine
overhaul or if it is necessary to open the
gearbox (C) for maintenance, grease should
be replaced.. Remove all old grease and add
new grease.
Use a grease based on lithium soap, NLGI
classification 2 (Example: LUBRAX LITH-2).
Grease quantity: 1.5 kg.
C
Instructions Manual
118

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido