Delete History; Define Home Display; Display Settings; Store Settings" (Store Actual Settings) - Grundfos TPE2 D Manual Del Usuario

17.36 Delete history

Pump variant
TPE3, TPE3 D
TPE2, TPE2 D
This menu is only available in the advanced control panel.
In this menu, you can delete the following historic data:
• "Delete work log".
• "Delete heat energy data".
• "Delete energy consumption".

17.37 Define Home display

Pump variant
TPE3, TPE3 D
TPE2, TPE2 D
This menu is only available in the advanced control panel.
In this menu, you can set the Home display to show up to four
user-set parameters.

17.38 Display settings

Pump variant
TPE3, TPE3 D
TPE2, TPE2 D
This menu is only available in the advanced control panel.
In this menu you can adjust the display brightness and set
whether or not the display is to turn off if no buttons have been
activated for a period of time.

17.39 "Store settings" (Store actual settings)

Pump variant
TPE3, TPE3 D
TPE2, TPE2 D
Grundfos GO
In this menu, you can store the actual settings for later use in the
same pump or in other pumps of the same type.
Advanced control panel
In this menu, you can store the actual settings for later use in the
same pump.

17.40 "Recall settings" (Recall stored settings)

Pump variant
TPE3, TPE3 D
TPE2, TPE2 D
Grundfos GO
In this menu, you can recall stored settings from a number of
previously stored settings that the pump then uses.
Advanced control panel
In this menu, you can recall the last stored settings that the pump
then uses.

Delete history

●
●

Define Home display

●
●

Display settings

●
●
Store actual settings
●
●
"Recall settings"
(Recall stored settings)
●
●

17.41 "Undo"

Pump variant
TPE3, TPE3 D
TPE2, TPE2 D
This menu is only available in Grundfos GO.
In this display, you can undo all settings that have been made
with Grundfos GO in the current communication session. You
cannot undo a Recall stored settings action.

17.42 "Pump name"

Pump variant
TPE3, TPE3 D
TPE2, TPE2 D
This menu is only available in Grundfos GO.
In this display, you can give the pump a name. In this way, you
can easily identify the pump when connecting with Grundfos GO.
Factory setting
See section 35. Factory settings.

17.43 "Connection code"

Pump variant
TPE3, TPE3 D
TPE2, TPE2 D
This menu is only available in Grundfos GO.
You can set a connection code to avoid having to press the
connection button each time and to restrict remote access to the
product.
Setting the code in the product using Grundfos GO
1. Connect Grundfos GO to the product.
2. In the product dashboard, select "Settings".
3. Choose "Connection code".
4. Enter the wanted code and press [OK].
The code must be a character string, ASCII.
You can always modify the code. The old code is not needed.
"Undo"
●
●
"Pump name"
●
●
"Connection code"
●
●
51